2
Remove 4 screws and pull out the Stand Body
from the Monitor set.
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
Downloaded from ManualMonitor.com Manuals
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
3
Press Power button on the front switch of panel
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
10 cm
10 cm
ASSEMBLING AND PREPARING
DC-IN /
to turn the power on.
CAUTION
7