Advertisement
For your safety
This accessory is designed for the hand mixer MQ964.. .
Follow the Instructions for Use for the hand mixer.
Do not attach or remove hand mixer until the appliance is at a standstill.
This accessory is suitable for cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts and almonds or for beating egg whites
and whipping cream. It must not be used for cutting very hard food
(e.g. coffee beans, nutmeg, sugar, radishes) or frozen food (e.g. fruit).
, Safety instructions for this appliance
Risk of injury from sharp blade/rotating drive!
Never grip the blade in the universal cutter. Never clean cutting blade
with bare hands. Use a brush.
Take hold of the cutter blade by the plastic handle only.
Important!
Never use the high-speed hand blender in the universal cutter jug.
The universal cutter jug is not microwave-safe.
Never immerse the attachment of the universal cutter in liquids and
do not clean under flowing water or in the dishwasher.
Before use, read these instructions
carefully in order to become familiar
with important safety and operating
instructions for this appliance.
Please keep the Operating instructions
in a safe place.
If passing on the appliance to a third party,
always include the Operating instructions.
Overview
Please fold out the illustrated pages.
Fig.
1 Universal cutter jug
2 Blade
3 Attachment
4 Lid
Operating the appliance
The universal cutter is suitable for cutting
meat, hard cheese, onions, herbs, garlic, fruit,
vegetables, nuts, almonds.
With the universal cutter use the appliance
at full power to prepare honey spread
(according to the recipe, see Fig.
Always observe the maximum quantities
and processing times in the table (Fig.
t~êåáåÖ>
qÜÉ=ìåáîÉêë~ä=ÅìííÉê=ãìëí=ÄÉ=ÅçãéäÉíÉäó=
~ëëÉãÄäÉÇ=ÄÉÑçêÉ=ìëÉK
`~ìíáçå>
_ÉÑçêÉ=ÅìííáåÖ=ãÉ~íI=êÉãçîÉ=ÖêáëíäÉI=ÄçåÉë=
~åÇ=ëáåÉïëK
qÜÉ=ìåáîÉêë~ä=ÅìííÉê=áë=åçí=ëìáí~ÄäÉ=Ñçê=ÅìííáåÖ=
îÉêó=Ü~êÇ=áíÉãë=EÅçÑÑÉÉ=ÄÉ~åëI=ê~ÇáëÜÉëI=
åìíãÉÖF=~åÇ=ÑêçòÉå=ÑççÇ=EÑêìáíI=ÉíÅKFK
Fig.
).
).
Place universal cutter jug on a smooth
and clean work surface and depress.
Insert the blade.
Add food.
Place the attachment on the universal
cutter jug and rotate in a clockwise
direction until it "clicks" into position.
On the base unit:
Move slide to position .
The rear aperture is open, the apertures
for inserting the tools are closed.
en
3
Advertisement
