Related Manuals for walimex TR-D4
Summary of Contents for walimex TR-D4
- Page 1 Copy of Instruction Manual 4-channel Remote Trigger Set TR-D4 Gewerbering 26 86666 Burgheim Tel. +49 84 32 / 9489-0 Fax. +49 84 32 / 9489 - 8333 eMail: info@foto-walser.de www.foto-walser.de...
- Page 2 Content How to understand the instruction manual........4 Markings on the device ..............4 Markings in this manual ..............4 Unpack and check the device ............4 Overview about the parts ............. 5 Quick-start guide ................5 Preparation for operation ............. 5 Connect the receiver with studio flash and to power supply ....
- Page 3 Thank you very much for your confidence. We wish you much pleasure and success with your new device. The walimex 4-channel Remote Trigger Set TR-D4 consists of one transmitter and one receiver. It is compatible with all studio flashes, whereby a direct intervisibility is not necessary.
- Page 4 Reference to declaration of conformity: ADVICE: Indicates potentially physical damages and other „Herewith Foto-Walser GmbH & Co. KG declares, that the device TR-D4 is important information in connection with your conform to the basic requirements and the other respective regulations of device.
- Page 5 Change batteries Overview about the parts WARNING Please just use batteries, which comply with the required specifications. See Technical Specifications. Transmitter Receiver 1. Use a Philips screwdriver to loose the screw on the bottom side of the Sync Cord Flash transmitter.
- Page 6 1. Adjust the channel on the backside of the Solve problems transmitter. Adjust the levers on e.g. O and N. Problem Possible reason Remedy 2. Adjust the channel on the backside of the Remote Cables are not plugged in Plug in all cables firmly receiver.
Need help?
Do you have a question about the TR-D4 and is the answer not in the manual?
Questions and answers