Dif - Panasonic AJ-SD255 Operating Instructions Manual

Setup menus (continued)
USER menu <DIF>
No./Item
880
This sets the transfer rate of the
IEEE1394 digital interface output.
DIF SPEED
0000
0001
YAD255G
0002
881
This sets the format when the
IEEE1394 digital signals are output.
DIF TYPE
0000 DVCPRO :
(For AJ-SD255P)
The signals are forcibly output in the
DVCPRO format.
0001
The signals are forcibly output in the
DV format.
0002
The same format as that of the
YAD255G
playback tape is set.
882
This sets the IEEE1394 digital input
channel.
DIF IN CH
0000
:
0063
0-63: These channels are fixed to
assigned values.
0064
The channel is not fixed to assigned
values. When the power is turned on,
YAD255G
the input channel is initialized to 63.
883
This sets the IEEE1394 digital output
channel.
DIF OUT CH
0000
:
0063
0-63: These channels are fixed to
assigned values.
0064
The channel is not fixed to assigned
values. When the power is turned on,
YAD255G
the output channel is initialized to 63.
886
This menu item is used to support
future expansion. Normally, "DFLT" is
DIF CONFIG
used as the setting.
0000
0001
:
YAD255G 0255
The underlined items indicates the initial setting.
This appears only when the optional board
YAD255G
AJ-YAD255G has been installed.
Description
S100 : 100 Mbps
S200 : 200 Mbps
S400 : 400 Mbps
DV :
AUTO :
0
:
63
AUTO :
0
:
63
AUTO :
DFLT
1
:
255
No./Item
889
This selects the channels to be used
for recording on the tape when DV
DIF AUD IN
format data with audio signals in the
4CH mode are to be input and then
(For AJ-SD255P)
recorded on a DVCPRO tape.
0000 CH1&2 :
Received DV format data CH1 and
CH2 are selected.
0001 CH3&4 :
Received DV format data CH3 and
YAD255G
CH4 are selected.
890 (For AJ-SD255P)
This selects the channels when a DV
DIF AUD OUT
tape with audio signals in the 4CH
mode is played and the signals are
output in the DVCPRO format or when
LOCK48 has been selected as the
setup menu item No.891 (DIF DV
AUDIO) setting.
(For AJ-SD255E)
When setup menu No. 891 (DIF DV
AUDIO) is set to LOCK48, this selects
the output channels for playing back
the DV tape with audio signals in 4CH
mode.
0000 CH1&2 :
DV tape CH1 and CH2 are selected.
0001 CH3&4 :
YAD255G
DV tape CH3 and CH4 are selected.
891
This sets the forced audio mode
conversion when a DV tape is played
DIF DV AUDIO
and its signals are output in the DV
format.
0000
0001
The audio mode is forcibly converted
to the LOCK mode. (The frequency is
not converted.)
0002 LOCK48 :
The audio mode is forcibly converted
YAD255G
to 48 kHz/2CH/LOCK.
Description
THRU : Normal (through)
LOCK :
33