Names And Functions Of Various Parts - Mitsubishi Electric Fresh Master GUF-50RDH4 Operating Instructions Manual

2. Names and functions of various parts

Fresh Master
The Fresh Master supplies clean air that is close to the indoor temperature and humidity by using the Lossnay ventilation function and the direct
a pleasant indoor environment.
Removes dust from the outside air.
Maintenance cover
Lossnay core
Temperature and humidity are
Outdoor unit
Outdoor units differ according to systems and can sometimes be in
Air outlet
Grounding conductor
Front panel (service panel)
Caution:
- Carry out grounding work. Never connect the grounding wire
to a gas pipe, water pipe, arrester, or telephone grounding
wire. Improper grounding work can result in electric shock.
Discharge valve
Service valve
Drain discharge hole
Strainer (O-ring installed)
Air inlet
Performs clean humidifying of the air supply
Not available on GUF-50 and 100RD4
Maintenance cover (for humidifying)
Water supply tube
Prevents clogs in the Lossnay core
Air supply fan
Fan to supply outside air to the inside
*GUF-50RDH4 shown above.
Remote controller
- Check out your remote controller. Different controllers are used for
different systems.
* If you open the door, the name of the Remote controller is shown
at the lower left.
Remote controller
[PAR-21MAA]
[PAR-F27MEA]
(Diagram of a controller with the door open.)
Display section
Operation section
(Diagram of a controller with the door closed)
Damper plate
Switches between the Lossnay ventilation
and normal ventilation.
4