Installation Of The Kx-Tda Maintenance Console; Installing And Starting The Kx-Tda Maintenance Console - Panasonic KX-TDA100 Installation Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

3.3
Installation of the KX-TDA Maintenance
Console
3.3.1

Installing and Starting the KX-TDA Maintenance Console

System Requirements
Required Operating System
Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP
Minimum Hardware Requirements
CPU: 300 MHz Intel Celeron microprocessor
HDD: 100 MB of available hard disk space
RAM: 128 MB of available RAM
Installing the KX-TDA Maintenance Console
Notes
Make sure to install and use the latest version of the KX-TDA Maintenance Console.
To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP
Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.
To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed. Follow
the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-PBX is first
connected to the PC via USB, you may be asked to select the appropriate USB driver. Browse for
and select the KX-TDA USB driver that was installed previously.
®
®
®
®

3.3 Installation of the KX-TDA Maintenance Console

1. Copy the setup file of the KX-TDA Maintenance Console to
your PC. (Its icon is shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the
installation wizard.
Installation Manual
163

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200

Table of Contents