Do you have a question about the NN-S752 and is the answer not in the manual?
Questions and answers
Rashmi
March 16, 2025
How do I reset the microwave. I have the mentioned microwave. The stop/reset button doesn't work. Otherwise the microwave works fine but when heating I have to run the full duration unless I open the door.
1 comments:
Mr. Anderson
March 16, 2025
To reset the Panasonic NN-S752 microwave when the Stop/Reset button is not working, follow these steps:
1. Unplug the Microwave – Disconnect the microwave from the power outlet. 2. Wait for a Few Minutes – Leave it unplugged for at least 5–10 minutes to allow internal components to reset. 3. Plug It Back In – Reconnect the microwave to the power source. 4. Check the Display – If the microwave powers on and the clock needs to be set, this indicates a successful reset. 5. Test the Controls – Try pressing other buttons to see if they respond. 6. Inspect for Issues – If the Stop/Reset button still does not work, the keypad or control panel may be faulty.
If the issue persists, professional repair or replacement may be necessary.
Need help?
Do you have a question about the NN-S752 and is the answer not in the manual?
Questions and answers
How do I reset the microwave. I have the mentioned microwave. The stop/reset button doesn't work. Otherwise the microwave works fine but when heating I have to run the full duration unless I open the door.
To reset the Panasonic NN-S752 microwave when the Stop/Reset button is not working, follow these steps:
1. Unplug the Microwave – Disconnect the microwave from the power outlet.
2. Wait for a Few Minutes – Leave it unplugged for at least 5–10 minutes to allow internal components to reset.
3. Plug It Back In – Reconnect the microwave to the power source.
4. Check the Display – If the microwave powers on and the clock needs to be set, this indicates a successful reset.
5. Test the Controls – Try pressing other buttons to see if they respond.
6. Inspect for Issues – If the Stop/Reset button still does not work, the keypad or control panel may be faulty.
If the issue persists, professional repair or replacement may be necessary.
This answer is automatically generated