14
170X5 LCD
Go to cover page
Front View
Fig. 1
Back View
Step 1: Use "l" type screwdriver to remove the Logo Cover as shown
in Fig. 3.
Clip
Fig. 3
Mechanical Instructions
97
313815413521
Logo Cover
Step 2: Unscrew 3 screws as shown in Fig. 4.
Step 3:
-Unscrew the four screws as shown in Fig. 5.
- Remove the base.
Fig. 5
Step 4: Remove the front bezel
- Use thin "l" type screwdriver to open 4 clicks on bottom
side as shown in Fig. 6.
- Use thin "l" type screwdriver to open 3 clicks on right
and left side as shown in Fig. 7.
- Use thin "l" type screwdriver to open 4 clicks on top
side as shown in Fig. 8.
Fig. 4
Fig. 6
Fig. 7