Memory Settings And Initializing The Replacement Ic (Ic204 On Sma); Storing Adjustments; Exit From Service Menu - Nokia 446PRO Service Manual

GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
CONTRAST
MIN CONTRAST
MAX CONTRAST
BRIGHTNESS
G2
RED BLACK LEVEL
GREEN BLACK LEVEL
BLUE BLACK LEVEL
RED AMP .
GREEN AMP .
BLUE AMP .
BCL ADJUST
EXIT
00: 1280x1024 85HZ
GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
TYPE : O
CUSTOM COLOR: 1
DDC : EXT (24LC21)
INITIALIZE EEPROM
INIT BURN IN TEST
EXIT
00: 1280x1024 85HZ
4.2.4. Memory settings and Initializing the Replacement IC204 on SMA board
If the memory for factory adjustments is replaced, it must be initialized. During initializing all memory
locations are written with approximate values. They must be updated in service mode as explained
in the chapter 'Adjustment Procedure'.
- INTIALIZE EEPROM always with using display mode no 00! (91.376 kHz/85 Hz (GTF642))
- After initializing switch OFF the monitor.
- Activate service mode as explained before.
- Select Memory settings ---menu.
- Select Monitor type O, custom color 1 and DDC (EXT (24LC21)
Caution
Initializing of a programmed memory IC deletes all user and factory made adjustments.
4.2.5. Storing the Adjustments
When the adjustment is ready, return to the menu by pushing the
stored automatically.
4.2.6. Exit from Service Mode
Switch off the monitor.
4.2.7. Uninstalled EEPROM
If you have uninstalled EEPROM. You can not adjust in user menu. You have to go first in service
menu and select Memory settings --- Initialize EEPROM.
18
GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
VERTICAL CONV
HORIZONTAL CONV
MOIRE
EXIT
00: 1280x1024 85HZ
446F
GEOMETRY . . .
GREY SCALE . . .
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
MODEL: HP P1110
SERIAL NUMBER FI92500061
POWER ON HOURS 23
STAND--- BY HOURS 0
SUSPEND HOURS 0
ACTIVE--- OFF HOURS 0
FIRMWARE 0.19
EXIT
00: 1280x1024 85HZ
button. Adjustement will be