Connecting To The Tv; Inserting The Batteries (Aaa X 2) - Samsung 5+ SERIES User Manual

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
We recommend to use the Smart Touch Control in less than 20ft(6m). A usable distance may differ
✎
depending on the wireless environmental conditions.
1. When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the
button for the fi rst pairing. Only this buttons sends an IR signal.
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to
connect to the Smart Touch Control automatically.
Reconnecting the Smart Touch Control
Low Battery Power Warning

Inserting the Batteries (AAA X 2)

1. Slightly lift the battery cover by using a plastic card. Next, pull on the cover's notch with a fi ngernail to remove
the cover completely.
Check the location of the battery cover groove. The groove's location may vary depending on the type of
✎
Smart Touch Control is provided with the product.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly
attached to the remote control.
[PF5500-AR]BN68-05116A-07ENG.indb 7
<Attempting to connect and completion icons>
<The Smart Touch Control pairing button>
If the Smart Touch Control stops operating or works abnormally, replace the battery
as this may be caused by insuffi cient battery power. If the problem persists, press
the PAIRING button on the Smart Touch Control to restore pairing with the TV. The
PAIRING button cannot be accessed without removing the Smart Touch Control's
battery cover. Within a distance between 30cm to 4m, point the Smart Touch Control
to the TV receiver and press the
pairing image displays at the bottom left of the TV screen.
If the battery becomes and blanks low while using the Smart Touch Control, the following
alarm window blinks and appears at the bottom left of the screen. Use alkaline batteries for
longer usage.
PAIRING button. When pairing is complete, the
English - 7
TV
2014-03-13 3:40:24