The Water Valve - Viking VCSB360 Service Notebook

Table of Contents

Advertisement

Servicing the Dual Water Supply Valve
The saber valve for the ice maker is located on a mounting bracket to the right of the component
compartment at the top of the unit. Be sure to turn off the water supply to the water fill valve before
doing any service to the valve.
1. Disconnect the copper water supply line from the valve assembly.
2. Remove the two hex head screws that secure the valve assembly to the mounting bracket.
3. Disconnect the plastic water line connector and tube from the valve.
4. Disconnect the two-wire connector from the valve's solenoid terminal.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vcsb480Vcsb420

Table of Contents