Map In Destination Search Mode - Panasonic CN-GP50N Operating Instructions Manual

Quitting Navigation
1. Tap the Menu button.
The M
2. Tap the Stop Navigation button to quit navigation.
A dialog window prompts you to confirm.
3. Tap the Yes button.
Functions of the Map in Navigation Mode
When the map is open in Navigation mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol for the mode that is
currently set is marked orange.
Day/Night: Changes the display mode between "day" and "night". The symbol
for the mode that is currently set is marked orange.
Interim Destination: Opens the menu for entering a way point.
The navigation system will first guide you to this interim destination.
Afterwards, you can simply continue your original navigation.
Skip Route Point: Tap this button to omit the next route point. This button is
inactive when less than 2 route points are pending.
Block: Tap this button in order to block a section of the route that lies in front of
you, i.e. to recalculate the route in order to avoid this section of the
route, e.g. if you have heard of a traffic jam relating to this section on
the radio.
Tap this button again to remove the block.
POI on Your Route: Tap this button to display POI on your route. This enables
you to find out, for example, how far it is to the nearest services. A
destination shown here can be added as an interim destination by
tapping the
the list.
8.5

Map in Destination Search Mode

The map is always in Destination Search mode when a pair of cross
hairs can be seen.
When you are driving, the map's orientation does not change. It is
always oriented with north at the top.
- 30 -
window opens.
ENU
(Interim Destination) button to the right of its entry in
Working with the Map