Prince Castle 919 Series Operating Instructions

Prince Castle 919 Series Operating Instructions

Tomato slicing system

Advertisement

Quick Links

OPERATING
INSTRUCTIONS
Tomato Witch    
Model No. 919 Series
Prince Castle's Tomato Witch is the ideal tomato
slicing system. The Tomato Witch provides the
safety and strength needed for superior results. It
uniformly slices tomatoes without manual scoring,
and is a necessity for portion control.
SPECIFICATION
919 Series
Length
Width
Height
Shipping Weight
Model No.
919-AAS
/
" Slice (.477 cm)
3
16
919-ABS
/
" Slice (.635 cm)
1
4
919-ACS
3
/
" Slice (.935 cm)
8
919-ADS
/
" Slice (.553 cm)
7
32
Printed in 1998
Prince Castle Inc.
Dimensions
15" (38.1 cm)
8"
(20.3 cm)
8
/
" (61.6 cm)
1
2
13 lbs.(5.9 kg.)
Number Of Blades
14
10
7
12
355 East Kehoe Blvd.
Tel: (630) 462-8800
Toll Free: 1-800-PCASTLE

TABLE OF CONTENTS

Installation ..................................................................... 2
Operating ....................................................................... 2
Cleaning ........................................................................ 3
Maintenance ................................................................. 3
Blades ............................................................................ 4
Parts List ....................................................................... 5
LIMITED WARRANTY
This Product is warranted to be free from defects in
material and / or workmanship for a period of (2) years
from date of original installation not to exceed 30
months from date of shipment from our factory,with
the exception of blades. Blades are warranted to be
free from defects at time of delivery only.
Any component which proves to be faulty in material
and/or workmanship will be replaced or repaired (at
the option of Prince Castle, Inc.) without cost to the
customer for parts or labor.
This warranty is subject to the following exceptions/
conditions:
Use of any non-genuine Prince Castle parts
voids this warranty. All genuine Prince Castle
replacement spare parts are warranted for ninety
(90) days from date of purchase.
This equipment is portable; charges for on
location service (e.g., trip charges, mileage)
are not included in the provisions of this war-
ranty.
Damage caused by carelessness, neglect, and/
or abuse (e.g., dropping, tampering or altering
parts), equipment damaged in shipment, by fire,
flood or an act of God is not covered under this
warranty.
W O R L D W I D E
Carol Stream, IL 60188
Fax: (630) 462-1460
W O R L D W I D E
PAGE
919-535

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 919 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Prince Castle 919 Series

  • Page 1 Any component which proves to be faulty in material and/or workmanship will be replaced or repaired (at the option of Prince Castle, Inc.) without cost to the customer for parts or labor. Prince Castle’s Tomato Witch is the ideal tomato slicing system.
  • Page 2 6. Place a clean, sanitized pan under slicer at the end Contact your local dealer, or if purchased opposite the handle to collect tomato slices. directly,the Prince Castle Customer Sales Department at 1-800-722-7853 to arrange for IMPORTANT: If rubber feet are missing slicer will slide a replacement to be sent.
  • Page 3 figure 3 CLEANING 1. Spray the blade assembly and pusher head with hot water to remove tomato residue. 2. Brush the pusher head and blades (from the back side) with the nylon pot brush and a hot soapy water. 3. Rinse by spraying with hot water. 4.
  • Page 4 REPLACING BLADES CLEANING BLADES Tools Required Flat blade screwdriver Always clean blades after each use. Food acids will dull and corrode blades. Clean between blades using a pot cleaning brush, and spray with hot water. Make sure to 1. Pull pusher head handle as far back as possible. Re- remove any excess tomato skin.
  • Page 5: Exploded View

    EXPLODED VIEW PARTS LIST ITEM PART DESCRIPTION ITEM PART DESCRIPTION 919-187A Blade Assy " (4.7mm) 919-19S Pusher Head Mounting Bolts (Pkg of 2) 919-188A Blade Assy " (6.4mm) 919-224 Base (Incl. Items 9,10,14 & 25) 919-189A Blade Assy " (9.5mm) 919-121S Bearing Block w/Mounting Screws (Pkg of 2) 919-191A...

Table of Contents