C Hp Flexfabric 5900Cp Switch Configuration File - HP flexfabric 5900cp Solutions Configuration Manual

C HP FlexFabric 5900CP switch configuration file

This appendix shows some sections from the HP FlexFabric 5900CP switch configuration file.
Use this as a guide for creating the configuration file for your specific implementation.
LLDP must be enabled for FCoE functionality
#
lldp global enable
#
The switch must be in advance mode to operate FCoE/FC
functionality
system-working-mode advance
#
Setup Switch Mode
Can also be fcoe-mode npv
fcoe-mode fcf
#
#
#############################################
#Define the vsan - valid vsan numbers 1-3839 maximum 16 per
switch
#Can set the domain ID as a static ID
#Zoning information for the vsan is kept here.
#To use persistent FCIDs define using wwn <your WWN>
area-port-id <4 digit hex of desired FCID>
vsan 100
domain-id 1 1 static
wwn 21:00:2c:27:d7:53:f5:87 area-port-id 0001
zone-alias name Enc6S1P1
member pwwn 10:00:6c:3b:e5:a4:a2:71
zone-alias name P10K-FC-ports
member pwwn 20:52:00:02:ac:00:62:f6
member pwwn 21:52:00:02:ac:00:62:f6
zone name P10K-FC
member zone-alias Enc6S1P1
member zone-alias P10K-FC-ports
zoneset name 5900CP_vsan100
member P10K-FC
zoneset distribute full
28 HP FlexFabric 5900CP switch configuration file