Introduction; Shipping List; Additional Equipment Required - Cisco spa112 Setup & User Manual

1 Introduction

This document describes how to install the Cisco terminal adaptors.
This document is applicable to the following devices:
Model Number
SPA 112
We use a sophisticated auto provisioning system to pre-configure and test all the devices
we supply.
This has the following advantages:
Easiest possible installation
•
Elimination of configuration errors caused by mistyping
•
The ability to seamlessly apply configuration and firmware updates
•
The ability to apply custom and site specific changes to your configuration.
•
The document is in two parts, the first section is the setup of a new Cisco as supplied
pre-configured for your use

1.1 Shipping List

Quantity Description
1 Cisco SPA112 (Terminal Adaptor)
1 UK Power Supply
1 Ethernet Cable
1 UK Telephone Socket converters
1 This Setup Guide

1.2 Additional equipment required

Operational Ethernet LAN with ADSL router providing Internet connectivity
•
Standard UK telephone(s)
•
Copyright © 2005-2012 Jaguar Telecom
Description
2 FXS Port Terminal Adaptor
Version 1.8 Page 2 of 8