Unpacking Your Printer; Turn On The Machine - MBot Grid II+ Quick Start Manual

MBot Grid II+ 3D Printer QUICK START GUIDE
●UNPACKING YOUR PRINTER
1. Place the box on the ground and open it up.
2. Slowly take MBot Grid II+ out of the box by grasping the upper frame with two hands. Place it
on a sturdy table.
3. Gently remove all the fixtures holding parts in place for transport. Be careful with scissors.
Download software and user manual from official website: http:www.mbot3d.com/software
●TURN ON THE MACHINE
Plug the power cord into the power supply, and then turn on the switch located on the back of the machine.
*WHAT INCLUDED:
①
Spool holder
Print bed
④
Power cord USB cable
Print Filament
Setup About
BOOT MENU
② ③
SD card
⑤ ⑥
Toolkit