Panasonic TC-32LX85 Operating Manual (English, Spanish) Quick Start Manual page 25

(Continued)
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital Only/Analog only)
•
Favorite: Only channels registered as FAVORITE (p. 17)
Selects the screen menu language (p. 13)
Adjusts the clock (p. 13)
Sets channels (p. 32)
Selects the terminal and label of the external equipment (p. 35)
Controls equipment connected to HDMI terminals (p. 26) (On/Off)
•
"Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set.
Sets "Power off link" of HDMI connection equipment (p. 26) (Set/No)
Sets "Power on link" of HDMI connection equipment (p. 26) (Set/No)
Selects the default speakers (p. 26) (TV/Theater)
Turns TV On automatically when the cable box or a connected device is turned On (No/Set)
•
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set.
(p. 36)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Set/No)
Note
•
Not in use when setting "Auto power on", "On/Off Timer", "Lock", or Digital channel.
•
"No signal shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No signal shut-off".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or side panel key
continues for more than 3 hours. (No/Set)
Note
•
Not in use when setting "Auto power on" or "On/Off Timer".
•
"No action shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No action shut off".
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room.
(Standard/Saving)
Set "On" to play back SD cards automatically. (On/Off)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings. (p. 32)
Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital Only/Analog only)
Sets favorite channels. (p. 17)
Displays Closed Caption. (p. 34) (Off/On)
Changes the station identifier. (p. 33)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 33)
Adjustments/Configurations (alternatives)
Adjustments/Configurations (alternatives)
Surf mode All
Language
Clock
Program channel
VIERA Link On
Power off link Set
Power on link Set
Default speakers TV
Auto power on No
No signal shut-off Set
No action shut-off No
Power Save Standard
Play SD card automatically On
About
Reset
25