Table of Contents
Advertisement
Audio Adjustments
Adjusting loudness
Loudness compensates for deficiencies in the
low and high sound ranges at low volume.
1
Press AUDIO to select LOUD.
Press AUDIO until LOUD appears in the dis
play.
2
Press a to turn loudness on.
LOUD indicator is displayed.
# To turn loudness off, press b.
3
Press c or d to select a desired level.
Each press of c or d selects level in the fol
lowing order:
LOW (low)MID (mid)HI (high)
Note
You can also turn loudness on or off by pressing
LOUDNESS.
Front image enhancer (F.I.E.)
The F.I.E. (Front Image Enhancer) function is a
simple method of enhancing front imaging by
cutting mid and high range frequency output
from the rear speakers, limiting their output to
low range frequencies. You can select the fre
quency you want to cut.
Precaution
When the F.I.E. function is deactivated, the rear
speakers output sound of all frequencies, not just
bass sounds. Reduce the volume before disenga
ging F.I.E. to prevent a sudden increase in vo
lume.
1
Press AUDIO to select FIE.
Press AUDIO until FIE appears in the display.
2
Press a to turn F.I.E. on.
# To turn F.I.E. off, press b.
3
Press c or d to select a desired fre-
quency.
Each press of c or d selects frequency in the
following order:
100160250 (Hz)
Notes
! After turning the F.I.E. function on, use the bal
ance adjustment (refer to page 11) and adjust
front and rear speaker volume levels until they
are balanced.
! Turn the F.I.E. function off when using a 2
speaker system.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra
dical changes in volume when switching be
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1
Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2
Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
3
Press a or b to adjust the source vo-
lume.
Each press of a or b increases or decreases
the source volume.
SLA +4 SLA 4 is displayed as the source vo
lume is increased or decreased.
Note
The MW/LW tuner volume level can also be ad
justed with source level adjustments.
Section
06
13
En
Advertisement
Table of Contents
