Pioneer SC-81 Operating Instructions Manual page 34

03
MULTI-ZONE setup using speaker terminals (ZONE 2)
You must select ZONE 2 in Speaker system setting (page 93
% Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
Sub zone (ZONE 2)
L R
Secondary MULTI-ZONE setup (ZONE 3)
SC-82 only
% Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
Sub zone (ZONE 3)
AUDIO IN
R L
) to use this setup.
Main zone
U RO ND ACK
R L
S l
SURROUND BACK
R L
(S ng e)
Main zone
ZONE 3
OUT
O E 3
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 67 .
%
Connect a separate receiver to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
Sub zone (HDZONE)
HDMI IN
34
Connecting your equipment
(page 98 ).
HDMI
Main zone
OUT 2 OUT 1
(HDZONE) (CONTROL)
SELECTABLE
D O N R
C