How To Use The Accessories - Kärcher SC 3 Operating Instructions Manual

Turning Off the Appliance
Illustration
 Press the OFF switch to turn off the ap-
pliance.
 Disconnect the mains plug from the
socket.
Illustration
 Push the steam switch until steam dis-
charge stops.
 The device is now free of pressure.
 Move the child protection unit toward
the back (steam lever locked).
ATTENTION
If the device is not used for a longer period
of time (approx. 2 months), please empty
the water tank. This avoids decomposition
of the water.
Illustration
 Completely empty the water tank to re-
move existing water.
Storing the Appliance
Illustration
Illustration
 Put the extension pipes into the large
accessory compartments.
 Insert the manual nozzle and detail noz-
zle onto each extension pipe.
 Attach the big round brush to the small
detail nozzle.
 Put the small round brush and nozzles
into the medium accessory compart-
ment.
 Hook the floor nozzle into the parking
position.
 Wrap the steam hose around the exten-
sion pipes and insert the steam pistol
into the floor nozzle.
12 English

How to Use the Accessories

Important application instructions
Cleaning floor surfaces
It is recommended to sweep or vacuum the
floor prior to using the steam cleaner. This
way, the floor is already cleared of dirt/
loose particles prior to the wet cleaning.
Refreshing textiles
Prior to treatment with the steam cleaner,
always check the reaction of the textiles in
an inconspicuous location: Steam at first,
then let dry and then check for colour or
shape changes.
Cleaning of Coated or Lacquered
Surfaces
When cleaning painted or plastic-coated
surfaces, as found on kitchen and living
room furniture, doors, parquet; wax, furni-
ture polish, plastic surfaces or paint can
come loose or stains can be created. When
cleaning these surfaces, briefly steam a
cloth and wipe the surfaces with it.
ATTENTION
Never direct the steam jet at glued edges
as the edge band may loosen. Do not use
the steam cleaner on unsealed wooden or
parquet floors.
Cleaning of Glass
In case of low outside temperatures, espe-
cially in the winter, warm up the window
pane by slightly steaming the entire glass
surface. This will prevent tensions on the
surface which might lead to glass break-
age.
Then clean the window surface with the
hand nozzle and attachment. Use a squee-
gee to remove the water or wipe the surfac-
es dry.
ATTENTION
Do not direct steam onto the sealed loca-
tions of the window frame to prevent dam-
age.