RX-V2600/DSP-AX2600
I UPDATING FIRMWARE / ファームウェアーの書き込み
When replacing the following parts, be sure to write the up-
dated data of the firmware.
IC301 of P.C.B. ASS'Y FUNCTION : X6909A00
... Writing of MAIN
IC507 of P.C.B. ASS'Y D-VIDEO
... Writing of VIDEO
IC542 of P.C.B. ASS'Y DSP
... Writing of DSP
G Required tools
• DOS/V machine, OS: Windows 98/2000/Me/XP, PC
with a serial port (RS232C)
• Program upgrading program
DSP_FLASHER_Vx600.exe
• Firmware
* Be sure to put following 3 firmwares in the same folder.
MAIN
.............................................. V26Mxxxx.mot
VIDEO ............................................... V26Vxxxx.mot
DSP
........... Vx600_verX_XX_0xXXXXXXXX.hex
• RS232C cross cable "D-sub 9 pin female"
(Specifications)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
G Preparation and precautions before starting
the operation
• Download DSP_FLASHER_Vx600.exe from the
specified source to the PC being used.
• Prepare the above specified RS232C cross cable.
• While writing, keep the other application software on
the PC closed. It is also recommended to keep the soft-
ware on the task tray closed as well.
16
下記の部品をサービス部品に交換した場合、最新のファー
ムウェアの書き込みを行ってください。
: X7220A00
: X7016A00
● 必要なツール
・ DOS/V機、OS:Windows 98/2000/Me/XP、シリアル
・ プログラムアップグレードプログラム
・ ファームウェア
・RS232Cクロスケーブル "D-sub 9pin メス"
(仕様)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
● 操作前の準備と注意
・ PCへ指定のダウンロード先から
・ RS232Cクロスケーブルは必ず上記仕様のものを用意し
・ 書き込み時は、PC上の他のアプリケーションソフトは
P.C.B. FUNCTIONのIC301 :X6909A00
... MAINの書き込み
P.C.B. D-VIDEOのIC507
:X7220A00
... VIDEOの書き込み
P.C.B. DSPのIC542
:X7016A00
... DSPの書き込み
ポート付き (RS232C) PC
DSP_FLASHER_Vx600.exe
※ 以下の3つのファームウェアは必ず同一フォルダ内へ
入れてください。
MAIN
.............................................. V26Mxxxx.mot
VIDEO ............................................... V26Vxxxx.mot
DSP
........... Vx600_verX_XX_0xXXXXXXXX.hex
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
DSP_FLASHER_Vx600.exeをダウンロードしてくだ
さい。
てください。
閉じてください。
さらに、タスクトレイ上にあるソフトも閉じておくこと
を推奨します。
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS