Sharp LE650U Operation Manual page 10

Watching TV
Initial Installation (Continue)
Antenna & Cable/STB
Select the type of connection you will use to watch TV.
6 Press / to select "Antenna & Cable" or "Set-top box",
and then press ENTER.
To watch TV via an antenna or cable connection
(without using a set-top box):
Select "Antenna & Cable", and then go to step 7.
To watch TV via a set-top box:
Select "Set-top box", and then press ENTER.
Check that the set-top box connected to the TV is on.
Press / to select the input to which the set-top box has
been connected.
If your Set-top box is turned off, "Disconnected" might be
shown.
ENG 2-4
To watch TV, select the input source corresponding to the
terminal connected to the set-top box. When doing so, you
must make the setting to skip "TV". Press
"On", and then press ENTER.
When this is set to "On", the channel on the TV cannot be
changed using the remote control unit or menu. (e.g. CH
/ , Favorite CH, etc.)
See page 4-20 for details on the Input Skip function.
Press INPUT to select the input source corresponding to
the terminal connected to the set-top box. Make the
necessary settings on the connected external equipment.
See the operation manual of the connected equipment for
setting up the equipment.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
7 Press / to select "Air" or "Cable".
Press ENTER to enter the setting.
/ to select