Remote Control Settings; Clock Settings - Panasonic DMR-ES15M Operating Instructions Manual

Remote control settings

Refer to the control reference on page 14.
Television operation
You can operate the TV through the unit's remote control.
Point the remote control at the television
While pressing [^ POWER TV], enter the code with
the numbered buttons.
e.g., 0250: [0] Ô [2] Ô [5] Ô [0]
Manufacturer and Code No.
Panasonic 0051/0250
National
QUASAR
FISHER 0154
GE 0047
GOLDSTAR 0178/0317/
0457
HITACHI 0145
JVC 0053
LG 0178/0317/
0457
MAGNAVOX 0054
MITSUBISHI 0150
Test by turning on the television and changing channels. Repeat the
procedure until you find the code that allows correct operation.
• If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
When other Panasonic products
respond to this remote control
When other Panasonic products placed nearby affect this unit's
remote control, change the remote control code on the main unit and
the remote control (the two must match).
Use "1", the factory set code, under normal circumstances.
To change the code on the main unit
1
While stopped
Press [SETUP].
2
Press [e,r] to select "Setup" and
press [q].
3
Press [e,r] to select "Remote Control
Code" and press [ENTER].
4
Press [e,r] to select the code ("1",
"2" or "3") and press [ENTER].
Remote Control Code
Setup
Press " " and "ENTER" together
for more than 2 seconds on the remote.
Channel
Setup
Disc
Video
A di
To change the code on the remote control
5
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
6
Press [ENTER].
n When the following indicator appears on the
unit's display
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].
PHILIPS (RC-5) 0054
RCA 0047
SAMSUNG 0060/0587/
0702
SANYO 0154
SHARP 0093/0165
SONY 0000
SYLVANIA 0054
THOMSON 0047
TOSHIBA 0156
ZENITH 0017
Press and hold [ENTER] and
the indicated number button
at the same time for more
than 2 seconds.

Clock settings

Refer to the control reference on page 14.
Set Clock Manually
In the case of a power failure, the clock setting remains in memory
for approximately 1 minute.
1
While stopped
Press [SETUP].
2
Press [e,r] to select "Setup" and
press [q].
3
Press [e,r] to select "Clock Settings"
and press [ENTER].
4
Press [e,r] to select "Set Clock
Manually" and press [ENTER].
Set Clock Manually
Setup
Month Day Year Hour Minute
1 / 1 2000 12 : 00
/ SAT
Channel
Setup
Disc DST Time Zone
Off EST EST
Video
Audio
5
Press [w,q] to select the item you
want to change and press [e,r] to
change the setting.
• DST (Daylight Saving Time): On or Off
If you select "On", the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on
the last Sunday in October.
• Time Zone shows the time difference from Greenwich Mean
Time (GMT).
EST (Eastern Standard Time)
CST (Central Standard Time)
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
6
Press [ENTER].
The clock starts.
Adjust Time Zone
Adjust the time zone (–1 or +1) if it was not set correctly with auto
clock setting.
You can set this menu only after "Set Clock Automatically" is
completed.
1
While stopped
Press [SETUP].
2
Press [e,r] to select "Setup" and
press [q].
3
Press [e,r] to select "Clock Settings"
and press [ENTER].
4
Press [e,r] to select "Adjust Time
Zone" and press [ENTER].
5
Press [e,r] to select "–1" or "+1" and
press [ENTER].
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].
AM
DST, Time Zone (Ô below)
= GMT –5
= GMT –6
= GMT –8
= GMT –9
= GMT –10
RQT8314
15