Panasonic PV-SD4090 Operating Instructions Manual page 25

Motion Image Rec Mode
Burst Rec Mode
You can capture a motion image by
selecting in REC MODE. And you can
capture a burst image by selecting
REC MODE.
Before you begin
Open the Lens Cover. Set the POWER
to REC or MANUAL REC. (See pages
19~20.)
3, 4
2
LCD Viewfinder
+
VOL
- +
-
VOL
SD4090.p22-33.p65
Capturing Images
1
Press REC MODE repeatedly to select
Motion (
mode.
2
Press ZOOM T or W to zoom In and
in
Out.
• Zoom magnification level is up to x3.
• There is no zoom indication on the
3
Press SHTR down halfway to lock
Auto Focus.
• Beep sounds twice. (See page 27.)
4
MIC
Hold down the SHTR button the rest of
the way to actually capture the image.
If you select AUDIO ON, audio will be
recorded through the MIC.
• A Motion Image
• A Burst Image
OFF
REC
PLAY
MANUAL
PC
REC
• While the Digital Camera processes
• Cannot record audio.
Note
• If you select
audio.
• When a captured image is displayed on
the LCD Viewfinder, you will not be able
to capture another image until that image
is no longer displayed on the screen.
• The power automatically shuts off to
conserve power if there is no activity for
over one minute while the battery is used
1
as a power source. Press SHTR to return
POWER on.
25
) or Burst ( ) recording
LCD Viewfinder.
10
REC MODE
can be captured
up to 10 seconds while SHTR is
pressed with audio.
REC MODE
can be captured
every 0.5 seconds/frame up to 16
frames while SHTR pressed.
the image, REC will blink on the LCD
Viewfinder and the captured image
will be displayed on the LCD
Viewfinder for a few seconds.
, you can not record
99/11/11, 16:39
REC
SEP. 10 2000
10 : 00 AM
25