–
Auto network switch: Automatically switch
between Wi-Fi networks and mobile networks.
–
Auto connect: Automatically connected to an AT&T
Wi-Fi Hotspot as soon as your phone detects it.
–
Install certificates: Install authentication
certificates.
–
MAC address: View your device's MAC address,
required when connecting to some secured networks
(not configurable).
–
IP address: View your device's IP address.
• WPS push button: Set up a connection to a WPS (Wi-
Fi Protected Setup) router or other equipment.
• WPS PIN entry: View the PIN used by your tablet to set
up a PIN-secured connection to a Wi-Fi router or other
equipment (not configurable).
• Help: Learn about setting up and using Wi-Fi networks,
and other settings.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for
Wi-Fi Direct.
1. From a Home screen, touch
Connections
Connections
Connection
Connections s
Connection
Connection
Connections
2. Touch the OFF/ON button to turn Wi-Fi ON
3. At the bottom of the Wi-Fi screen, touch Wi-Fi Direct.
4. Repeat Steps 1–3 on the other device with which you
want to connect.
The steps on the other device may vary depending on
the device. Refer to the documentation for that device.
5. On your phone, touch Scan. The device scans for other
Wi-Fi Direct devices.
6. Once the device you want to connect to displays,
touch it.
7. The other device has 1 minute to touch Connect for
the connection to be made.
Apps
Settings
Wi-Fi.
.
Connections
113