Troubleshooting; Led (Power Switch) On The Front Panel Blinks In Red; Preparation; Setting Of Pc - Sony PVM-A250 Service Manual

3-1. LED (Power Switch) on the Front Panel Blinks in Red

Connect this unit and terminal PC to confirm the device and register in this unit and perform the process-
ing corresponding to the value.

3-1-1. Preparation

Equipment required
. Personal computer (PC)
OS: Windows XP, Windows Vista, and Windows 7
. LAN cable (Cross cable)
. Terminal software: Tera term, etc.

3-1-2. Setting of PC

t
The procedure in this section is described using Windows XP. The procedure and term may vary depend-
ing on the environment of OS used.
1. Start PC.
2. Click Start → Setting → Control panel → Network connection.
3. Right-click the Local Area Connection.
A Local Area Connection Properties screen appears.
PVM-A250
Section 3

Troubleshooting

Select internet protocol
version 4 (TCP/IPv4).
[Properties] button
3-1 (E)