Appendix: Glossary - Dell S520 User Manual

Interactive projector
Hide thumbs Also See for S520:
Table of Contents

Advertisement

7
ANSI Lumens — A standard for measuring the brightness. It is calculated by
dividing a square meter image into nine equal rectangles, measuring the
lux (or brightness) reading at the center of each rectangle, and averaging
these nine points.
Aspect Ratio — The most popular aspect ratio is 4:3 (4 by 3). Early
television and computer video formats are in a 4:3 aspect ratio, which
means that the width of the image is 4/3 times the height.
Brightness — The amount of light emitted from a display or projection
display or projection device. The brightness of projector is measured by
ANSI lumens.
Color Temperature — The color appearance of white light. Low color
temperature implies warmer (more yellow/red) light while high color
temperature implies a colder (more blue) light. The standard unit for color
temperature is Kelvin (K).
Component Video — A method of delivering quality video in a format that
consists of the luminance signal and two separate chrominance signals
and are defined as Y'Pb'Pr' for analog component and Y'Cb'Cr' for digital
component. Component video is available on DVD players.
Composite Video — A video signal that combines the luma (brightness),
chroma (color), burst (color reference), and sync (horizontal and vertical
synchronizing signals) into a signal waveform carried on a single wire pair.
There are three kinds of formats, namely, NTSC, PAL, and SECAM.
Compressed Resolution — If the input images are of higher resolution
than the native resolution of the projector, the resulting image will be
scaled to fit the native resolution of the projector. The nature of
compression in a digital device means that some image content is lost.
Contrast Ratio — Range of light and dark values in a picture, or the ratio
between their maximum and minimum values. There are two methods
used by the projection industry to measure the ratio:
Full On/Off — measures the ratio of the light output of an all white image
1
(full on) and the light output of an all black (full off) image.
ANSI — measures a pattern of 16 alternating black and white rectangles.
2
The average light output from the white rectangles is divided by the
Downloaded From projector-manual.com DELL Manuals

Appendix: Glossary

125
Glossary

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents