Philips DVD727 Owner's Manual page 14

14 Hookups (cont'd)
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Back of TV
(example only)
1
3
1
Connect the supplied video cable to the yellow VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV's
VIDEO IN jack. The supplied video cable has yellow markings.
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the Stereo. Match the
cable colors to the jack colors.
3
Plug the power cords of the DVD Player, Stereo, and TV
into an active power outlet. Press STANDBY-ON y y on the
front of the DVD Player to turn it on.
4
Turn on the Stereo and set it to the correct Audio In
channel or sound source. Refer to the Stereo owner's manual for
details.
5
Turn on the TV. Set it to the correct Video In channel. See
your TV owner's manual for details. Or, go to your lowest TV
channel (01 or 02) and change channels downward until you see the
blue DVD screen on the TV.
Downloaded From Disc-Player.com Philips Manuals
Connecting to a TV and a two-channel Stereo
VIDEO IN
VIDEO IN
Stereo
(example only)
LEFT AUDIO IN
RIGHT AUDIO IN
2
Helpful Hint
• If you prefer or need to use the
S-VIDEO or Y Pb Pr jacks
instead, see pages 12-13.You
only need one video connection
between the TV and the DVD
Player.