Philips DVD727 Owner's Manual page 11

3
1
Connect the yellow VIDEO (VIDEO OUT) jack of the DVD
Player to the corresponding VIDEO IN jack on your TV. Use
the supplied video cable, which has yellow markings.
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the TV. The supplied
audio cables have red and white markings. Match the cable colors to
the jack colors.
3
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press STANDBY-ON y y on the front of
the DVD Player to turn it on.
4
Turn on the TV. Set it to the correct Video In channel. See
your TV owner's manual for details. Or, go to your lowest TV
channel (01 or 02) and change channels downward until you see the
blue DVD screen on the TV.
Downloaded From Disc-Player.com Philips Manuals
Connecting to a TV Only
TV has a yellow Video In jack
Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
RIGHT AUDIO IN
LEFT AUDIO IN
1
VIDEO IN
Hookups (cont'd) 11
2
Helpful Hints
• On the TV, the Video In jack is
usually yellow and might be
labeled video, CVBS, composite,
or baseband.
• If your TV has a single Audio In
jack instead of separate
left/right Audio In jacks, you will
need a different audio cable.
You need a "splitter" audio
cable to go from the left/right
AUDIO OUT jacks of the DVD
Player to the single Audio In
jack on your TV. See your
electronics retailer for details.