Taking Pictures Using Auto Bracket; Vqt0Q40 - Panasonic Lumix DMC-FZ5GN Operating Instructions Manual

Panasonic digital camera operating instructions
Hide thumbs Also See for Lumix DMC-FZ5GN:
Table of Contents

Advertisement

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically
recorded by each press of the shutter
button according to the compensation
range of the exposure.
You can select the desired exposure
among the 3 types of pictures.
1 Press 3 several times until
[
AUTO BRACKET] appears
and then set the compensation
range of the exposure.
AUTO BRACKET
SELECT
• You can select the exposure from
j1 EV to i1 EV in steps of 1/3 EV.
• When you do not use auto bracket,
select [OFF].
• When setting the auto bracket, the auto
bracket icon appears on the lower left of
the screen.
Recording pictures (basic)
• If the remaining number of recordable
• When taking pictures using auto bracket
• When the flash is activated, you can take
• When the auto bracket is activated,
• When setting the quality to [TIFF], you
• When setting auto bracket and the burst
• The exposure may not be compensated
EXIT
• Auto bracket is cancelled after switching
• When setting the auto bracket, the auto
pictures is 2 or less, you cannot take
pictures by setting auto bracket.
after the exposure compensation, the
pictures are based on the compensated
exposure.
When the exposure is compensated, the
compensated exposure value appears on
the lower left of the screen.
only 1 picture.
[AUDIO REC.] cannot be used.
cannot take pictures with the auto bracket.
mode simultaneously, auto bracket will be
performed.
with auto bracket depending on the
brightness of the subject.
the camera off.
review function is activated regardless of
the setting on the auto review function.
(The picture is not enlarged.) Moreover,
the settings for the auto review function on
the [SETUP] menu are disabled.
45

VQT0Q40

Advertisement

Table of Contents
loading

Table of Contents