Advertisement
Introduction
The 1x2 Compact VGA & Audio Splitter allows
you to distribute content from a single source to
two VGA monitors simultaneously.
Features and Benefits
•
Supports VGA, SVGA, XGA, UXGA and
Multi-Sync monitors
•
Supports up to 1920 x 1440 resolution
•
Video bandwidth: 250MHz
•
Distance: up to 50M (164ft)
Layout
04-0669B
1x2 Compact VGA & Audio
Splitter
Quick Installation Guide
Monitor ports
Figure 1: Layout
Audio connectors
1
Advertisement
Table of Contents
Related Manuals for SIIG CE-VG0B11-S1
Summary of Contents for SIIG CE-VG0B11-S1
- Page 1 1x2 Compact VGA & Audio Splitter Quick Installation Guide Introduction The 1x2 Compact VGA & Audio Splitter allows you to distribute content from a single source to two VGA monitors simultaneously. Features and Benefits • Supports VGA, SVGA, XGA, UXGA and Multi-Sync monitors •...
-
Page 2: Package Contents
Package Contents • 1x2 Compact VGA & Audio Splitter • Quick installation guide Hardware Installation Power off all devices connecting to splitter. Connect the splitter’s VGA cable to the computer’s VGA port. Connect the splitter’s 3.5mm audio plug to the computer’s audio out jack (optional). Connect the splitter’s USB cable to the computer’s USB port for power. - Page 3 Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.
- Page 4 Fremont, CA 94538-3152, USA Phone: 510-657-8688 1x2 Compact VGA & Audio Splitter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the CE-VG0B11-S1 and is the answer not in the manual?
Questions and answers