Table of Contents
Related Manuals for Triton XT18
Summary of Contents for Triton XT18
- Page 1 Reciprocating Saw RJSB tritontools.com...
- Page 2 PRESS POWER LEVEL...
-
Page 4: Description Of Symbols
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you fully understand the instructions. -
Page 5: Specification
XT 18V c) Do not expose power tools to rain or wet conditions. Water entering a As part of our ongoing product development, specifications of Triton power tool will increase the risk of electric shock. products may alter without notice. -
Page 6: Additional Safety Rules For Reciprocating Saws
Additional Safety Rules for 3) Personal safety a) Stay alert, watch what you are doing and use common sense when Reciprocating Saws operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal WARNING! injury. -
Page 7: Product Familiarisation
Before Use Use batteries correctly • • Only charge batteries using the charger provided. Only use batteries Removing a battery provided with this power tool, or others recommended by the supplier. Keep batteries clean; foreign objects or dirt may cause a short. Allow •... -
Page 8: Operation
Adjusting tool speed 4. To remove a blade from the chuck, rotate the chuck collar fully Note: This Triton reciprocating saw features variable speed control, adjusted anticlockwise, and pull the blade forward, out of the chuck by the Variable Speed Trigger Switch (6), which enables it to be used with a Notes variety of different materials, workpieces and objects. -
Page 9: Maintenance
8. Commence with cutting as normal Spare parts can be purchased from your Triton dealer or online at www. toolsparesonline.com Notes: • Use the same plunge technique when re-entering the same inset cut slot Maintenance until a section of material has been removed that allows entry from the edge of the material within the inset cut •... -
Page 10: Warranty Exclusions
3 YEARS from the date of original purchase, Your details will be included on our mailing list (unless indicated Triton will repair, or at its discretion replace, the faulty part free of otherwise) for information on future releases. Details provided will not be made available to any third party. - Page 11 Notes...
Need help?
Do you have a question about the XT18 and is the answer not in the manual?
Questions and answers