Product Makes Noise, But Nothing Copies; Copies Are Cut Off; Product Makes Noise When It Sits For A While; Solving Paper Problems - Epson l220 User Manual

Product Makes Noise, But Nothing Copies

If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's power is on, make sure your product
software is installed correctly.
• Make sure your product is level (not tilted).
Parent topic:
Related concepts
Print Head Cleaning
Print Head Nozzle Check

Copies are Cut Off

Depending on your product, the default paper size for copies is either A4 (8.3 × 11.7 inches
[210 × 297 mm]) or Letter (8.5 × 11 inches [216 × 279 mm]).
• To change the default paper size to A4 (8.3 × 11.7 inches [210 × 297 mm]), make sure the product is
turned off, then hold down the
on. When the product turns on, release both buttons.
• To change the default paper size to Letter (8.5 × 11 inches [216 × 279 mm]), make sure the product is
turned off, then hold down the
on. When the product turns on, release both buttons.
Parent topic:

Product Makes Noise When It Sits for a While

Your product is performing routine maintenance. This is normal.
Parent topic:

Solving Paper Problems

Check these sections if you have problems using paper with your product.
Paper Feeding Problems
Paper Jam Problems
Paper Ejection Problems
Solving Copying Problems
color copy button and press the
B&W copy button and press the
Solving Copying Problems
Solving Copying Problems
power button to turn the product
142
power button to turn the product