Housing; Arm (Suction) - Sony XR-4950X Service Manual

Note: Follow the assembly procedure in the numerical order given.
3-2.

HOUSING

2 Install the hanger onto
4 Fit claw on B part.
3 Put the housing
under A part.
housing
A part
3-3.

ARM (SUCTION)

projection
5 Fit projection on C part.
two claws of the housing.
C part
B part
7 Hold the hanger by bending the claw.
1 Install the catch to the hanger.
hanger
8 Hold the hanger by
bending the claw.
2 Move the arm (suction) in the arrow
direction and fit on projection.
1 Fit the arm (suction) on the shaft.
XR-4950X
6 Fit projection on D part.
D part
11