Table of Contents
Advertisement
Basics
Quick Connect
Automatically search for nearby devices and quickly connect to them.
• I f the device you want to connect does not support the Quick connect feature,
activate its Wi-Fi Direct feature before launching Quick Connect on your device.
• C onnection methods may vary depending on the type of connected devices or the
shared content.
Connecting to other devices
1
Open the notification panel and tap Quick Connect.
If you are using this feature for the first time, select a visibility option and tap ENABLE
QUICK CONNECT.
When the panel opens, the Wi-Fi feature is activated automatically and the device
searches for nearby devices.
If you have installed Samsung Link on your device, the list of devices registered
with Samsung Link will appear at the top of the screen. For more information about
Samsung Link, visit link.samsung.com.
2
Select a device from the list and connect to it by following the on-screen instructions.
The next steps may vary depending on the connected device.
To change your device's visibility setting, tap SETTINGS → Device visibility, and then
select an option.
Re-searching for devices
If the desired device does not appear in the list, search for the device.
Tap REFRESH and select the device from the list of detected devices.
29
Advertisement
Table of Contents
