Advanced Setup - Honeywell EConnect TL9160AR Operating Manual

Operating Manual

Advanced setup

* You can set the temperature display unit in °C or °F. You can set the time display format in 12-hour or 24-hour
(military time) if the thermostat is in programmable mode.
** Accessible only if you use the thermostat in programmable mode.
When Adaptive Intelligent Recovery is on, the thermostat "learns" how long your heater takes to reach the set
temperature. The thermostat will then determine when to activate heating so the desired temperature is attained
at the desired time. The thermostat re-assesses the heating start time daily based on the previous day's
performance. When Adaptive Intelligent Recovery is off, heating starts at the set time.
*** Leave at On to use the thermostat in programmable mode. Place at Off to use the thermostat in non-
programmable mode.
Setup functions
Temperature and time formats *
Adaptive Intelligent Recovery **
Programmable mode (Schedule) ***
Default setting
°F
12h
On
On
18
Options
°C / °F
12h / 24h
On / Off
On / Off