Charging The Battery; Handset Battery Information; Belt Clip - Panasonic KX-TGA450 Installation Manual

Charging the battery

Place the handset on the charger and charge for 7 hours
before initial use.
• The CHARGE indicator will light, and "Charging" is
displayed.
• When the battery is fully charged, "Charge completed"
is displayed.
• Recharge the battery when:
— "Recharge battery" is displayed on the handset,
— " " flashes,
2
— the handset beeps every 60 seconds while it is in use
or in standby mode.

Handset battery information

After your Panasonic battery is fully charged, you can expect the following performance:
Operation
While in use (TALK)
While not in use (Standby)
• Clean the charge contacts of the handset and the charger with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.

Belt Clip

You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip
Charge Contacts
CHARGE Indicator
Operating time
Up to 15 hours
Up to 7 days
To remove the belt clip
– 2 –