Burst Recording - Panasonic HX-DC2 Operating Instructions Manual

Advanced (Recording)

Burst recording

Records a sequence of still pictures at a rate of 10 per second or 1 per
second.
Use this function to record fast-moving subject.
≥ Set to Recording mode. (l 30)
1
Select the menu.
# [BURST] # desired setting
[MENU]:
1
(14M BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the
recording when the maximum number pictures in the burst are reached.
(3M BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the
recording when the maximum number pictures in the burst are reached.
(14M REVERSE BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(3M REVERSE BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(OFF):
Cancel the setting.
2
(For auto focus only)
Press the button halfway.
button, ending the
button, ending the
button. On release of the
button. On release of the
VQT4D23
63