Yamaha AUDIOGRAM 6 Owner's Manual page 13

Usb
Hide thumbs Also See for AUDIOGRAM 6:
Table of Contents

Advertisement

Recording and Playback
1
Click the Transport panel [Record] button to
begin recording.
When recording is started the project cursor will
begin moving to the right and a box that displays the
recording results will be created.
<Transport panel>
Rewind
Forward
2
Play the part.
3
When you finish recording the track, click
the Transport panel [Stop] button.
To hear playback of the track you have just recorded,
use either the Transport panel [Rewind] button or the
ruler to rewind to the beginning of the recorded sec-
tion, then click the Transport panel [Start] button.
Recording with maximum quality and mini-
mum noise:
For optimum sound quality with minimum noise, the
AUDIOGRAM signal levels should be set as high as
possible without clipping. Check signal levels to be
sent to Cubase AI for recording using the AUDIO-
GRAM level indicators while the DAW control is set to
minimum. Adjust the channel LEVEL controls so that
the corresponding PEAK LEDs flash only occasionally
on the highest input transients.
Record
Start
Stop
Recording results
4
Select [Mixer] from the [Devices] menu to
open the Mixer window.
The overall playback level will be displayed via the
master section bus level meter on the right side of the
mixer window, and the channel level will be dis-
played via the channel strip level meter.
NOTE
To hear the playback sound via the AUDIO-
GRAM interface, adjust the volume with the
DAW control and MASTER LEVEL control.
The playback level will approximately match
the recording level when the DAW control is
set to about 1 o'clock.
Level meter
5
To save the project select [Save] from the
[File] menu and enter a file name before actu-
ally saving the file.
Save your project frequently to insure against losing
large amounts of data if a problem occurs.
6
Repeat steps 1 through 5 to record further
material on the same track.
7
To record additional material on a different
track, select a new track and repeat the
record procedure.
AUDIOGRAM 6 Owner's Manual
Quick Guide
Bus level meter
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents