Recording With Cubase Ai - Yamaha AUDIOGRAM 6 Owner's Manual

Quick Guide
Step 5

Recording with Cubase AI

This section describes the procedure for recording to the Cubase AI software we installed earlier via the
AUDIOGRAM interface.
NOTE Cubase AI 6 is used for the examples in this manual. For details about other versions of Cubase AI or
Cubase AI operation in general, refer to the PDF manual provided with the software.
Cubase AI Setup
1
Set the computer output to the maximum
level.
For details on how to make the setting refer to the
"The recorded sound is too low in level." section in
the "Troubleshooting" on page 17.
2
Launch Cubase AI.
Windows:
Click [Start] → [All Program] → [Steinberg Cubase
AI *] → [Cubase AI *] to launch the program. ("*"
indicates where the version number appears in the
actual icon name.)
If the ASIO Direct Sound Full Duplex Driver
NOTE
dialog window appears, click [OK].
Mac:
Double-click the [Application] → [Cubase AI*]. "*"
indicates where the version number appears in the
actual icon name.
NOTE • If you specified a file destination when
installing the Cubase AI software, launch the
application from that location.
• Create a Cubase AI shortcut or alias on your
desktop so you can easily launch the pro-
gram when required.
3
When the Project Assistant window appears,
select the [More] menu→[Empty] and click
[Create].
A new project is created.
Recorded Cubase AI data is stored as a
NOTE
"Project."
10
AUDIOGRAM 6 Owner's Manual
4
Select [Device Setup] from the [Devices]
menu to open the Device Setup window.
Windows:
Select [VST Audio System] in the [Devices] field on
the left side of the window. Select [ASIO DirectX
Full Duplex Driver] in the [ASIO Driver] field on the
right side of the window. A dialog box will appear
asking "Do you want to switch the ASIO driver?".
Click [Switch].
Mac:
Select [VST Audio System] in the [Devices] field on
the left side of the window. Select [USB Audio
CODEC] in the [ASIO Driver] field on the right side
of the window. A dialog box will appear asking "Do
you want to switch the ASIO driver?". Click
[Switch].