Panasonic DMP-BDT320 Operating Instructions Manual page 32

Network
∫ Easy Network Setting (
∫ Network Settings
Perform network-related settings individually.
Tap to show the following settings:
LAN Connection Mode
Select the LAN connection method.
≥ Select "Wireless Master" when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Connection Setting
The wireless router connection wizard will be
displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this
sets the connection speed.
≥ If you connect using the "Double Speed
Mode (40MHz)", 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Tap to show the respective setting.
Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Tap to show the respective setting.
32
VQT3V73
13)
Network Service Settings (
(VIERA Connect)
Tap to show the following settings:
Audio Auto Gain Control
Volume that is different depending on the
contents is adjusted automatically to the
standard volume while using the VIERA
Connect.
≥ Depending on contents, this function effect
will not work.
≥ Select "Off" when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set
the unit's time to match your location.
≥ Some VIERA Connect contents require the
time zone to be set. Set the time zone if
necessary.
Summer Time
Select "On" when using Daylight Saving time.
Network Drive Connection
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of
connected equipment, refer to the following
Website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Remote Device Settings (
Tap to show the following settings:
Remote Device Operation
Enable to operate by DMC.
≥ If "On" is selected, "Quick Start" will be
activated.
Device Name Entry
Set the name of this unit to be displayed on
the connected equipment.
22)
24)