Functions Not Available During 3D Playback - Panasonic HDC-SDT750 Operating Instructions Manual

≥ You cannot play back 3D video on the LCD monitor of the unit. When you play back scenes
recorded in 3D on the LCD monitor, they will be played back in 2D.
≥ You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the
same day, the unit will display the date separately when switching between 2D and 3D
recordings.
≥ When you play back scenes successively, a black screen will appear for a few seconds
between scenes recorded in 3D and scenes recorded in 2D.
≥ When outputting 3D video to a television, the date and time display is double normal size.
≥ In the 1 scene or Highlight&Time frame index thumbnail display, a black frame appears
around the thumbnails. For the 9 scenes or 20 scenes thumbnail display, black frames may
appear when a divide or repair is performed. (The unit automatically performs scene repair
if faulty management information is detected.)
≥ When you select a 3D video thumbnail, it may take a few seconds for playback to start.
After playback, the thumbnail display may take a few seconds to reappear.
≥ If you set [3D PLAYBACK] to [3D] with the unit connected to a television that does not
support 3D, the video will be played back in 2 screens.
≥ Depending on the 3D-compatible television used, switching to 3D mode may be slow and
you may not be able to watch the first scene. In this case, use the pause button.
≥ When viewing 3D video, your eyes may become tired if you are too close to the television
screen. Use the supplied remote control to operate from a distance.

Functions not available during 3D playback

j Creating still picture from motion picture
j Highlight&Time frame index ([FACE], [HIGHLIGHT])
j Yellow button display and deletion function during VIERA Link (During playback only)
j Face highlight playback
j Highlight playback
j Intelligent scene selection
41
(ENG) VQT3B26