Download  Print this page

Call Block - Panasonic KX-PRS120 Operating Instructions Manual

Premium design phone.
Hide thumbs

Advertisement

Table of Contents
Programming
4
*: Select "AM" or "PM". a MOKN
5
Enter the desired hour and minute you
wish to end this feature.
6
*: Select "AM" or "PM".
7
MSaveN a MOFFN
Changing the start and end time
1
MMenuN (right soft key) #237
2
Continue from step 3, "Turning silent
mode on/off", page 27.
Selecting groups to bypass silent
mode
1
MMenuN (right soft key) #241
2
Select your desired groups by pressing
1 to 9.
R " " is displayed next to the selected
group numbers.
R To cancel a selected group, press the
same dial key again. " " disappears.
3
MSaveN a MOFFN

Call block

This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted ("Storing unwanted callers",
page 28).
– the unit receives a call without phone
number ("Blocking incoming calls without
phone number", page 28).
When a call is received, the unit rings for a
*1
short time
while the caller is being identified.
If the phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call. (Caller ID
subscribers only)
*1
This is called first ring. If you do not want
the first ring to sound, turn this setting to
"Off" (page 29).
Important:
R When the unit receives a call from a
number that is stored in the call block list or
For assistance, please visit http://www.panasonic.com/help
28
PRS120(en)_0122_ver110.pdf
Storing unwanted callers
You can store up to 100 phone numbers in the
call block list.
Important:
R You must store the phone number with an
n From the caller list:
n By entering phone numbers:
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing "Out
of area".
1
2
28
a call without a recognized phone number,
the call is logged in the caller list
(page 33) with
after the call is
disconnected.
area code in the call block list.
1
MCN CID
2
MbN: Select the entry to be blocked. a
MDetailN
R To edit the number: MMenuN a
MbN: "Edit" a MSelectN
Press MEditN repeatedly until the
phone number is shown in the
10-digit format. And then, press
MSaveN. Go to step 5.
3
MMenuN
4
MbN: "Save CID" a MSelectN
5
MbN: "Call block" a MSelectN
6
MbN: "Yes" a MSelectN
7
Edit the phone number if necessary
(24 digits max.).
8
MSaveN a MOFFN
1
MMenuN (right soft key) #217
2
MMenuN a MbN: "Add" a MSelectN
3
Enter the phone number (24 digits
max.).
4
MSaveN a MOFFN
MMenuN (right soft key) #240
MbN: Select the desired setting. a MSaveN
2014/01/22
10:09:31

Advertisement

Table of Contents

   Also See for Panasonic KX-PRS120

   Related Manuals for Panasonic KX-PRS120

This manual is also suitable for:

Kx-prs120c

Comments to this Manuals

Symbols: 0
Latest comments: