Outdoor Electronic Controller Removal Procedure - Panasonic CU-E18DBE Service Manual

12.5.5. Outdoor Electronic Controller Removal Procedure

1. Remove the top panel and front panel
2. Remove the Outdoor Electronic Controller
Caution! When handling electronic controller, be careful of
electrostatic discharge.
Fig. 8
Fig. 9
• Be save to return the wiring to its original position
• There are many high voltage components within the heat
sink cover so never touch the interior during operation.
Wait at least two minutes after power has been turned off.
71
CS-E15DD3EW CU-E15DBE / CS-E18DD3EW CU-E18DBE
Fig. 10