JVC SRC-1020-1ORT Instructions Manual page 12

Table of Contents

Advertisement

Problem
Data cannot be imported The title to be dubbed is copyright protected. Titles that are copyright-protected cannot be dubbed. Select
The number of titles stored in the HDD has
reached the maximum amount.
The remaining space on the HDD is running
out.
"START" cannot be selected when a title that
cannot be dubbed is chosen.
"START" cannot be selected due to insufficient
HDD space or upon reaching the maximum
number of titles in the HDD.
"START" cannot be selected as a dubbing title
list is not created.
Recording is performed in
If recording is started with an input that is not
a mode other than the
recordable in the preset recording mode,
preset mode
recording will start after switching
automatically to the recordable mode.
The title/group name
Protection of the title/group name is turned on. Turn protection off for the title/group name.
cannot be changed
The remote control unit
The battery of the remote control unit has run
does not work
out.
The remote control code of this unit and the
remote control unit are different from each
other.
A "LOCKED" message appears on the display
window of the unit.
The disc cannot be
A "LOCKED" message appears on the display
ejected
window of the unit.
The "READING" message does not disappear
from the unit's display window, and the disc
tray does not open when the [ M ] button is
pressed.
The disc cannot be played A disc that cannot be played on this unit is
inserted.
The region code of the BD or DVD is different
from that of this unit.
An unfinalized DVD disc that is recorded using
another device is inserted.
Output is at "480i"
The component output setting may be
changed to "480i" (SR-HD2700U) or "576i"
(SR-HD2700U) or "576i"
(SR-HD2700E) after viewing at a setting of
(SR-HD2700E)
1080/24p using an HDMI connection.
regardless of the
component output
resolution setting
The aspect ratios of the
When two monitors are connected
HDMI output and
respectively to the HDMI output and
component output are
component output terminals of this unit, the
different
screen aspect ratio of the component output
may not be appropriate if "VIDEO PRIORITY
MODE" is set to "HDMI".
Mode Conversion cannot
Turning off the power may not start mode
be performed although
conversion even if "AFTER POWER OFF" in
"SEAMLESS" in the
"SEAMLESS" is set and mode conversion is
"MODE CHANGE" menu
interrupted by the power being turned on while
is set to "AFTER POWER
mode conversion is in progress.
OFF" and the power is
turned off.
12
Troubleshooting
Symptom
a title that is not copyright-protected.
Delete or combine the titles in the HDD to reduce the amount
of titles to less than 500.
Delete the titles in the HDD to increase the remaining space.
Delete unwanted titles from the HDD.
Alternatively, format the HDD.
Select at least one content for dubbing.
Check the preset recording mode and make an appropriate
selection before recording starts.
Change new batteries for the remote control.
Change the "REMOTE CONTROL CODE" for the remote
control to the same number used by this unit.
Disable the "mode lock" setting.
Disable the "tray lock" setting.
Pressing the [ M ] button at the front of the unit for five
seconds or longer opens the disc tray. To close the disc tray
after removing the disc, press the [ A ] button, and wait until
the tray is closed and power is turned off.
(If the disc tray does not open after pressing the [ M ] button
for five seconds or longer, contact the local dealers in your
area.)
Confirm that the disc is playable on this unit.
Confirm that the region number is playable on this unit.
Use that device to finalize the disc.
Turn the power off, and turn it on again.
When two monitors are connected simultaneously, users
are recommended to set "VIDEO PRIORITY MODE" to "SDI/
COMPONENT".
Cancel mode conversion.
Action
0 When importing data from a BD/DVD to the HDD,
selection of "START" may be enabled after you return to
recording mode selection to change the recording mode.
0 Some titles cannot be dubbed depending on their
recording mode and format.
You can distinguish titles that cannot be dubbed by
selecting the titles one by one.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Src-1020-1bt

Table of Contents