Basic Tv Operation; Channel Preset - Panasonic CY-TUP153N Operating Instructions Manual

Basic TV Operation

Refer to the CQ-VD7003N and CQ-VD6503N
instruction manuals for information on TV operation
15
on the CQ-VD7003N and CQ-VD6503N touch panel
and remote control.
[PWR] (Power) [ENT] (ENTER)
[MENU]
[BAND]
[] (CH UP)
[] (CH DOWN)
[] []
(PRESET)
16 CY-TUP153N
Power
Turn your car's ignition key to the ACC or ON position.
ON: Press [PWR] (Power).
OFF: Press [PWR] (Power) again.
Note:
 When changing the source to TV tuner on Head Unit
(CQ-VD7003N, CQ-VD6503N, option), the power is
turned on automatically.
Band Selection
Press [BAND].
TV1 TV2
Note:
 TV2 is provided to allow more preset channels in
memory.
Channel Selection
Press [] (CH DOWN) or [] (CH UP).
[] (CH UP): Higher channel number
[] (CH DOWN): Lower channel number
Press and hold [] (CH DOWN) or [] (CH UP) for more
than 0.5 seconds. Seeking will start.
TV Channel Display
Press [ENT] (ENTER).
Press [ENT] (ENTER) again to display off.
Example: When preset channel is not set.
TV band Selected TV channel number
Note:
 Only English is displayed on the OSD screen.
 Background of the display becomes blue when the unit
cannot get a good reception on the TV.

Channel Preset

Warning
 To ensure safety, never attempt to preset channels
while you are driving.
 Up to 12 channels can be stored in each of the TV1 and
TV2 band selections.
 TV2 is provided to allow more preset channels in
memory. Channels that could not be placed in memory
on the Band TV1 can be placed on the Band TV2.
 If Band TV1 is suffi cient to hold all desired channels,
they should usually be preset to that band.
Note:
 New channels overwrite existing saved stations after
these procedures.
Auto Preset Channel Memory
With this operation, channels with good receiving
conditions can be automatically stored in the preset
memory.
 Press [BAND] to select the TV band.
 Press and hold [BAND] for more than 2 seconds.
12 channels with fi rst to 12th highest in signal
strength will be preset to each band. (They are listed in
order, from the earliest channel number.)
Preset Channel Calling
 Press [BAND] to select the TV band.
 Press [] or [] (PRESET).
Selected preset channel number
Writing Preset Channel (PRESET
WRITE)
Favorite channels can be written after you have set the
preset channel once.
Example:
The 25 channel is written in the TV1 preset channel list.
 Press and hold [] (PRESET) for more than 2
seconds.
Preset channel writing mode display appears.
 Press [] (CH DOWN) or [] (CH UP) to select
channel you want to write.
TV channel you want to write
 Press [ENT] (ENTER) or [BAND] to set.
 Press [MENU] to exit the preset channel writing mode.
Deleting Preset Channel (PRESET
DELETE)
Channels can also be deleted from the presets when no
longer required.
Example:
The 30 channel is deleted in the TV1 preset channel list.
 Press and hold [] (PRESET) for more than 2
seconds.
Preset channel deleting mode display appears and
preset 1 channel is received.
 Press [] or [] (PRESET) to select preset channel
you want to delete.
Preset channel you want to delete
 Press [ENT] (ENTER) or [BAND] to set.
 Press [MENU] to exit the preset channel deleting
mode.
CY-TUP153N
16
17