Changing Channels - Panasonic TX-28DTS3 Operating Instructions Manual

Changing channels

Using the ch key
Press ch + or – on your remote control to change channels
up or down, one at a time.
Using the channel number
If you know the channel number, you can use the number
keys to access the channels. Channel numbers are always
three digits, for example 106.
Each time you change channel, the Search & Scan banner appears on–screen.
The banner will disappear automatically after a few seconds, or you can press back up
to remove it immediately.
For a description of the Search & Scan banner see page 5.
4
Getting started