Status & Settings Screen navigation
1.
Press the up/down arrows to scroll through the pages.
(See Table 3 below for Settings screen structure).
2.
Press an icon to change the value of an option or enter a
subscreen.
3.
Press Close to return to the previous screen.
Table 3: Status & Settings screen structure
Option
How to view
Event History
Press the Show icon to view system events.
Note: If a # appears in the Event History list, the
event was not sent to the central station.
Direct Bypass
Press the Select icon to enter the sensor bypass
screen.
Panel Status
Press the Listen icon to listen to the status of
your security system. Press Clear to clear the
status.
Chime
Press the On/Off icon to set the chime feature
On/Off.
Note: This option may or may not appear
depending on panel programming.
Special Chime
Press the On/Off icon to set the special chime
feature On/Off.
Note: This option may or may not appear
depending on panel programming.
Lights
Press Control to access the Light screen. From
there you can turn On/Off programmed lights.
Note: Has not been investigated by UL.
Door Locks
Press Control to access the Door Lock screen.
From there you can lock/unlock programmed
door locks.
Note: Has not been investigated by UL.
Voice Volume
Press the arrows to adjust the speech volume
level.
Beep Volume
Press the arrows to adjust the beep volume level.
Press the arrows to adjust the screen’s
Brightness
brightness.
Use this feature to set this panel’s screen saver
Default Screen
mode. Select “Blank” to have the screen and LED
go dark after a period of inactivity. Otherwise, the
default will be the Home screen and the screen
will always be lit. If AC power is lost, the screen
will go blank after 2 minutes of inactivity to
maximize battery life.
Note: The screen will automatically go blank at
2:00 am daily for 60 minutes.
Calibration
Press the Show icon to enter the calibration
screen. This screen will allow you to recalibrate
the touch screen.
Help
Press the Help icon to access the Help menu.
Set Date/Time
Press Enter to set the date and time.
System Tests
Press Enter to perform a sensor test or system
download.