Sony UHP-H1 Operating Instructions Manual page 40

Hide thumbs Also See for UHP-H1:
Table of Contents

Advertisement

Settings] to [On] (page 33). Refer to
the instruction manual supplied
with the AV amplifier (receiver).
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[Linked to TV-off] in [HDMI Settings]
are set to [On] and [Valid] (page 33).
Others
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
beginning].
Playback does not start from the
resume point where you last stopped
playing.
, The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Message Code 1 [Playback stopped.
The content being played is protected
by Cinavia and is not authorized for
playback on this device. For more
information, see
http://www.cinavia.com. Message
Code 1] appears on the screen when
playing a disc.
, The audio track of the video that you
are playing contains a Cinavia code
indicating it was intended for
presentation using professional
equipment only and is not authorized
for playback by consumers (page 5).
40
The disc tray does not open and
"LOCK" or "D ON" appears on the
front panel display.
, When "LOCK" appears, the player is
locked. To cancel the Child Lock,
press x STOP, HOME, and then TOP
MENU button on the remote until
"UNLCK" appears on the front panel
display (page 11).
, When "D ON" appears, contact your
Sony dealer or local authorized Sony
service facility.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, While the player is turned on, press x
STOP, HOME, and then TOP MENU
button on the remote to unlock the tray
and disable the Child Lock (page 11).
, Try the following:
off, and disconnect the AC power cord.
Reconnect the AC power cord while
2
pressing down Z on the player.
Keep pressing down Z on the player
3
until the tray opens.
disc.
Disconnect and reconnect the
5
AC power cord again to recover the
player.
"Exxxx" or "TEMP" appears on the
front panel display.
, When "Exxxx" appears, contact your
nearest Sony dealer or local authorized
Sony service facility and give the error
code.
, When "TEMP" appears, place the
player in a location with adequate
ventilation to prevent heat build-up in
the player. "TEMP" will appear for a
short time.
Turn the player
1
Remove the
4

Advertisement

Table of Contents
loading

Table of Contents