Bd/Dvd Viewing Settings] - Sony UHP-H1 Operating Instructions Manual

x [Bluetooth Codec - AAC] /
[Bluetooth Codec - LDAC]
This function is enabled when
[Bluetooth Mode] is set to [On].
[On]: Enables AAC/LDAC codec.
[Off]: Disables AAC/LDAC codec.
b
This function is disabled during connection
with a Bluetooth device.
z
LDAC is an audio coding technology
developed by Sony that enables the
transmission of High-Resolution (Hi-Res)
Audio content, even over a Bluetooth
connection. Unlike other Bluetooth
compatible coding technologies such as SBC,
it operates without any down-conversion of
the Hi-Res Audio content*, and allows
approximately three times more data** than
those other technologies to be transmitted over
a Bluetooth wireless network with
unprecedented sound quality, by means of
efficient coding and optimized packetization.
* Excluding DSD format contents.
** In comparison with SBC (Subband
Coding) when the bitrate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
is selected.
x [Wireless Playback Quality]
This function is enabled when
[Bluetooth Mode] and [Bluetooth Codec
- LDAC] is set to [On]. If sound output
or network streaming is unstable, please
select [Connection].
[Auto]: Sets the transmission data rate
for LDAC automatically.
[Sound Quality]: The highest data rate is
used. Sound is sent at a higher quality,
but audio playback may become
unstable if the link quality is not
sufficient.
[Standard]: A medium data rate is used.
This provides a balance between sound
quality and playback stability.
[Connection]: Stability is prioritized.
The sound quality may be reasonable
and the connection status will most
likely be stable.
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
Selects the default menu language for
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and
enter the code for your language,
referring to "Language code list"
(page 47).
x [Audio Language]
Selects the default audio language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the
language given priority in the disc is
selected.
Select [Select Language Code], and
enter the code for your language,
referring to "Language code list"
(page 47).
x [Subtitle Language]
Selects the default subtitle language for
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and
enter the code for your language,
referring to "Language code list"
(page 47).
x [BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
31